top of page
Hydraulic Deep Drawing Press 20-2500 Tons (Single Action, Double Action, Triple Action)
Hydraulic Deep Draw Press 20-2000 Tons (Single Action, Double Action, Triple Action)

🏆 ISO 9001:2015 Certified | 🌍 Exporting to USA, UAE, India, Europe & Worldwide | 🔒 100% Payment Safety

Hydraulic Deep Draw Press Up To 2000 Tons (Single Action, Double Action, Triple Action)

  • Turn Flat Sheets into Fortunes. Zero Wrinkles. Zero Defects.

  • The world’s most trusted Hydraulic Deep Draw Press Machine. Engineered for Kitchen Sink, LPG Cylinder, and Automotive manufacturing.

  • You don't just want a machine. You want perfection.

  • A bad Deep Draw Press chews up your expensive stainless steel sheet and spits out scrap. A Centaurix Deep Draw Press prints profit.

  • Whether you need a 100 ton deep draw press to a 2000 ton hydraulic deep draw press, we guarantee a perfect part, every single cycle.

Stop Bleeding Money on "Cheap" Presses.

  • Most deep draw press manufacturers lie to you. They sell you a standard press for a complex job. The result? Wrinkling. Tearing. Thickness variation. Every rejected part comes directly out of your profit margin.

  • If you are looking for a used deep draw press for sale or a cheap deep drawing power press, be careful. A "cheap" machine is the most expensive mistake you will ever make.

  • You need precise control. You need a Double Action Hydraulic Press with active blank-holding technology. Or a Hydraulic Press with Die Cushion that fights back against the metal flow.

  • Centaurix Global Technologies provides Custom deep draw press quotes for machines that don't just run—they perform. Powered by high-efficiency Hydraulic Power Pack Units.

Stop Bleeding Money on Cheap Hydraulic Deep Drawing Presses

Heavy Duty Deep Drawing Presses Uses for Automotive, Electric Vehicle, LPG, Kitchenware & Sheet Metal Giants

When safety is on the line, you cannot afford a mistake. A weak press makes a weak tank. That is a liability you cannot afford. Our Heavy Duty Deep Draw Presses are built to meet rigorous global safety standards.
1. Cylinder Manufacturing Plants (LPG/CNG)
We supply the muscle for pressure vessel manufacturing.

  1. LPG cylinder deep drawing machine: Perfect forming for the top and bottom halves.

  2. Gas cylinder manufacturing press: High-tonnage capability for thicker steel walls.

  3. CNG cylinder deep draw press: Extreme force for high-pressure natural gas tanks.

  4. Fire extinguisher body press machine: Certified precision for safety equipment.
     

2. Automotive & Sheet Metal Stamping

  1. From a Car body panel drawing press to the engine bay, we power the auto industry.

  2. Automotive oil sump press: Deep, leak-proof drawing for engines.

  3. Fuel tank deep draw machine: Precision forming for petrol and diesel tanks.

  4. Silencer body forming press & Compressor housing deep draw press: High-volume components made easy.
     

3. The Future: Electric Vehicle (EV) Tech
Don't get left behind. The EV market is exploding. We offer specialized presses for:

  1. EV battery housing deep draw press: Create lightweight, strong aluminium casings.

  2. Aluminum battery tray press: Precision flatness for battery packs.

  3. Prismatic battery cell case press: The heart of modern EV power.
     

4. The Ultimate Kitchen Sink Making Machine

  • Don't let cracked corners destroy your brand.

  1. ​Our Stainless steel sink press machine uses advanced "Double Action" logic to ensure even deep rectangular sinks come out flawless.

  2. We are the specialist for Kitchen sink deep draw press lines.
     

5. Pots, Pans & Cookers

  1. From a Stainless steel pot making machine to a Pressure cooker body press machine, speed is everything.

  2. ​Our High Speed Deep Draw Press systems allow for rapid cycling without overheating.
     

6. Aluminum & Non-Stick

  • Need an Aluminum cookware press? Aluminum tears easily. Our Deep drawing aluminum process controls enable gentle, consistent pressure.

  • Vessel Pressing Machine, Steel bowl making machine

  • Deep draw press for utensils, Cutlery deep draw press

  • Holloware manufacturing press, Pot Press


7. Construction & Hardware

  • Wheelbarrow manufacturing press: High-volume tray forming.

  • Shovel making hydraulic press: Hardened steel blade forming.

  • Corrugated sheet forming press: For roofing and siding.

  • Door skin forming press: Texture and shape embossing.


8. Automotive & Industrial Components

  • Brake shoe forming press: Precision radius forming.

  • Clutch plate forming press: High-tonnage flattening and shaping.

  • Fan blade forming press: Aerodynamic curve forming.

  • Heat exchanger plate press: Complex pattern embossing.

  • Gasket forming press: Precision cutting and shaping.

  • ​Panel embossing press: For decorative or structural patterns.


9. Heavy Duty Stamping & Punching 

  • Need speed and power? Our Hydraulic stamping press line is built for high-volume production.

  • Automotive & Industrial: We supply the Automotive stamping press used by Tier-1 suppliers. From a Heavy duty stamping press for chassis parts to a Metal stamping hydraulic press for brackets.

  • Precision Cutting: Configure your machine as a Hydraulic blanking press or a Hydraulic punching press machine. Our rigid frames ensure your Sheet metal punching press dies last longer.

  • High Speed: We offer Progressive die hydraulic press systems and Transfer stamping press lines for automated mass production.


10. Advanced Forming Technologies

  • We are a Hydraulic press engineering company capable of building complex, process-specific machines.

  • Hydroforming: Looking for a Hydroforming press machine? We build Sheet hydroforming press units for complex, lightweight shapes.

  • Rubber & Elasto Forming: We manufacture Rubber pad forming press and Elasto forming press solutions for the aerospace industry.

  • Specialty Materials: Whether you need a Titanium forming press, an Aluminum forming press machine, or a Superplastic forming press for exotic alloys, we have the technology.

  • Temperature Controlled: We build both Hydraulic press for cold forming and Hydraulic press for hot forming (including Warm forming press technology).

  • Composites: We even supply the Composite forming press used for thermoplastic sheets.

Heavy Duty Deep Drawing Presses Uses for Automotive, Electric Vehicle, LPG, Kitchenware

Single Action vs. Double Action vs. Triple Action : The Expert Guide

Choosing the wrong action will ruin your product. Here is the simple truth about Double action deep draw press vs Single action deep draw press vs Triple action deep draw press technology.

Option A: The Double Action Hydraulic Deep Draw Press (The Master)

  • This is the "Rolls Royce" of drawing. It uses two separate hydraulic circuits from the top.

  • Outer Ram (Blank Holder): Comes down first. It grips the rim of the sheet metal tight.

  • Inner Ram (Punch): Comes down second. It forces the metal into the die.

  • Why you need it: It allows the metal to flow without wrinkles. Essential for Kitchen sink deep draw press lines and irregular shapes like Deep Drawer Press slides.
     

Option B: The Single Action Press + Die Cushion Hydraulic Deep Draw Press (The Specialist)

  • A single ram pushes down. To control the flow, we install a Bottom cushion hydraulic press (or Die cushion hydraulic press) inside the bed. It pushes up against the metal to create tension.

  • Why you need it: Great for round shapes, Geyser Tank Manufacturing Machine, and Water heater tank press applications. Also known as a Cold Drawing Press.
     

Option C: The Triple Action Hydraulic Deep Draw Press

  • The ultimate machine. It draws down, then draws up (reverse draw) in a single cycle. Used for extremely complex aerospace and automotive parts.


Fact: Our Deep Draw Stamping Press features "Active Levelling Control" to keep the ram perfectly parallel, even under off-center loads. This saves your dies from wearing out.

Deep Drawing Hydraulic Press Manufacturer
Single & Double Action Deep Draw Hydraulic Press
Capacity Class
Popular Keyword Targets
Ideal Application
Custom
1500 ton - 2000 ton deep draw press
Defense, Railways, Ship Building
Titan
1000 ton hydraulic drawing press
EV Battery Housing, Structural Parts
Massive
600 ton - 800 ton deep draw press
Large Body Panels, Aerospace
Extra Heavy
500 ton hydraulic deep draw press
Truck Parts, CNG Cylinders
Industrial
400 ton deep draw press
LPG Cylinder Deep Drawing, Geysers
Heavy Duty
300 ton double action hydraulic press
Automotive Oil Sump, Small Cylinders
Standard
200 ton hydraulic drawing press
Kitchen Sink Making Machine, Auto Brackets
Medium Duty
150 ton double action press
Cooking pot hydraulic press, Small Pans
Light Duty
100 Ton Double Action Press
Small Bowls, Filters, Cups

Select Your Power: 100 Ton to 2000 Ton Capabilities

  • We don't guess. We calculate. Whether you need a compact 100 ton deep draw press or a massive factory-sized unit, we build to your spec.

  • ​Also available: Hydraulic press with 100 ton cushion and Hydraulic press with 200 ton cushion options for custom setups.

  • Our machines are not limited to deep drawing. They are versatile Industrial metal forming press systems designed for every shaping need.

  • Whether you need a Custom metal forming hydraulic press for aerospace or a standard Hydraulic press for metal forming in a job shop, we engineer the perfect solution.

Deep Draw Press Cost Guide

  • You are probably asking: "What is the hydraulic deep draw press cost?"

  • Here is the truth. A cheap press will cost you double in maintenance. We provide fair, transparent pricing for world-class Indian engineering.

  • While deep draw press manufacturers in China might offer bulk manufacturing, and deep draw press manufacturers in USA charge a premium, Centaurix India gives you European quality at Asian prices.

  • Machine Type --- Starting Investment (Approx.) --- Status

    • New 100 Ton Double Action / Starts from ₹12 Lakhs / Custom Built

    • New 500 Ton Heavy Duty / Request Quote / Industrial Grade

Hydraulic Deep Draw Press Price List & Cost Guide
Most Trusted Hydraulic Deep Draw Press Manufacturers Delivered Worldwide Hydraulic Deep Draw Press

Most Trusted Manufacturers. Delivered Worldwide.

  • Centaurix Global Technologies is not just a local shop. We are a premier deep drawing hydraulic press manufacturer and sourcing partner for the world.

  • We manage the entire logistics chain.

    • USA & Europe: OSHA/CE Compliant options available.

    • Middle East (UAE/Saudi): Fast shipping for Sheet metal deep draw press projects.

    • Africa & Asia: Robust machines built for tough environments.

  • Don't deal with 10 different agents. Work with one Deep draw press supplier who handles everything. We offer comprehensive AMC and Repair Services > Our Services

Why Smart Factory Owners Choose Centaurix

  • Don't get tricked by a low quote, Most deep drawing machine price estimates you see online are for bare-bones, low-quality skeletons, We sell complete production units.

  • You might be looking at a Hydraulic metal forming press China to save money, or a Hydraulic metal forming press factory in Europe for quality.

  • We are the top Metal forming press manufacturer India. We combine European engineering with Indian cost-efficiency.

  • We are a global Metal forming press exporter. We are a trusted Hydraulic press machine supplier UAE and a verified Hydraulic press machine supplier USA.

  • We are your Custom hydraulic press builder. Unlike a trading company, we are a Hydraulic press OEM India partner. We deliver a Turnkey metal forming plant—from design to installation. Every machine undergoes our 5-Point Inspection Process > Our Process

Real Fact: Buying a cheap press often costs extra in scrap metal waste within the first year due to wrinkling defects. Buy it right the first time.

Why Smart Factory Owners Choose Centaurix Hydraulic Vs Other Hydraulic Manufacturers

  • Looking for a Sheet metal forming hydraulic press or a Precision metal forming press? Request our Metal forming press price list today.

  • We are the Vertical metal forming press and Automatic metal forming press experts.

  • From Hydraulic press sheet metal forming to 4 column metal forming press and H frame metal forming press designs, we build it all.

Inside a World-Class Deep Draw Machine Manufacturer

Inside a World-Class Deep Draw Machine

  • The "Brain": PLC & Servo Control -
    Stop using manual levers. Our machines feature Servo hydraulic deep draw press technology. You can program the exact speed for the draw and the exact holding pressure for the ring. This is how you achieve consistent Precision deep draw press quality for automotive and aerospace parts.

  • The "Heart": Efficient Hydraulics -
    We use high-speed pump configurations to reduce cycle time. For high-volume factories, we offer Automated deep draw press line integrations with robotic feeding arms.

  • The "Backbone": Stress-Relieved Steel -
    Our frames undergo stress relieving processes. Whether it's a 500 ton hydraulic deep draw press or a compact unit, the frame will not warp under load.

Lifetime Support. No Excuses.

We don't disappear after the sale.

  • Parts: Need a seal kit? A new cylinder? We supply genuine spares for every machine we sell.

  • Upgrades: Turn your old Double acting press into a smart machine.

  • Support: Technical troubleshooting via video call or onsite engineer dispatch (Worldwide).

Ready to Start Manufacturing?

  • You have seen the machines. You understand the technology. Now, you have a choice.

  • You can waste weeks calling unverified numbers on directory sites. OR, you can get a Single, Vetted, expert-managed solution from Centaurix today.

  • From the first Custom deep draw press quote to the final installation at your factory, we are with you.

  • Don't just buy a machine. Invest in a partner.

Frequently asked questions

bottom of page